Frankfurt Imveliso UV Laser

Malunga neNkampani yeLaser yaseFrankfurt (FLC)

Yasekwa ngo-1994, ikomkhulu eFrankfurt, eJamani.

Ubuchwephesha obungundoqo: Gxininisa kwi-lasemiconductor lasers (i-laser diodes), kunye noluhlu lwamaza angama-266nm ukuya kwi-16μm kunye namandla ukusuka kwi-5mW ukuya kwi-3000W28.

Iimpawu zeMveliso:

Ukubonelela ngezisombululo zelaser ezilungiselelwe umkhosi, i-aerospace, ezonyango, ishishini kunye nezinye iindawo13.

Ukubhiyozela isikhumbuzo seminyaka engama-30 ngo-2024 kwaye uqhubeke nokukhuthaza iteknoloji yelaser innovation1.

2. FLC UV Laser Product Line

(1) UV Laser Diode

Umzekelo womzekelo:

I-FWSL-375-150-TO18-MM: I-375nm i-multimode ye-UV laser diode, i-output power 150mW, ifanelekile kunyango, ukunyangwa kwezoshishino, njl.

I-FVLD-375-70S: I-375nm i-UV laser diode ye-single-mode, i-70mW imveliso, i-high-precision optical measurement, i-lithography, njl.

Uluhlu lwe-Wavelength: 375nm-420nm (kufuphi ne-ultraviolet, i-NUV), ezinye iimveliso zinokwandiswa kwi-266nm (i-ultraviolet enzulu, i-DUV) i-68.

Iindawo zesicelo:

Ezonyango: unyango lwesifo solusu, ukuvala inzala kunye nokubulala iintsholongwane (280–315nm MUV) 1.

Umzi-mveliso: Ukunyanga kwe-UV (ezifana neenki, iingubo), ukuchaneka kwe-micromachining (njengokusika kwesafire) 17.

Uphando lwezenzululwazi: i-fluorescence microscopy, i-semiconductor lithography (<280nm FUV/VUV) 16.

(2) I-high-power picosecond UV pulse laser

Umzekelo: FPYL-Q-PS series 3.

Iiparamitha:

Ubude bobude: 266nm (1–8W), 355nm (1–50W).

Ububanzi be-Pulse <10ps, ukuphindaphinda ukuphindaphinda 1MHz, amandla aphezulu 100W.

Isicelo:

Ukulungiswa kwezinto ezinqabileyo (isafire, iiseramics, i-OLED).

Ishishini leSemiconductor (ukusika iwafer, ukugrumba kancinci)37.

3. Iinzuzo ezingundoqo ze-laser ye-UV

Ukuqhubekeka kokuchaneka okuphezulu:

I-laser ye-UV ine-wavelength emfutshane (efana ne-355nm), enokufikelela kwi-micron-level processing (ubuncinci be-aperture 60μm), ilungele izinto ezilukhuni kunye ne-brittle ezifana nesafire kunye ne-diamond7.

Ummandla omncinci ochaphazelekayo ukushisa, ukunciphisa iintanda zezinto (xa kuthelekiswa neCO₂ laser)7.

Itekhnoloji yokucubungula ebandayo:

Ifanelekile kwizinto ezithintekayo ukushisa (ezifana neesekethe eziguquguqukayo, izicubu ze-biological)37.

Ukusebenza kweshishini:

I-laser ye-UV ye-FLC ixhasa ukupakishwa okulungiselelweyo (TO, ibhabhathane, ukudityaniswa kwefayibha), kwaye iqhelana nemekobume erhabaxa (efana nobushushu obuphezulu, ukungcangcazela)48.

4. Ubuchwephesha obunokubakho obunxulumeneyo: I-EdgeLight idibene ne-UV laser

Kwiprojekthi ye-KonFutius (ekhokelwa nguFraunhofer IPT), i-laser ye-UV yayisetyenziselwa ukusika ngokuchanekileyo kunye ne-welding yeepaneli zokukhanyisa i-Edgelight, ukubuyisela iinkqubo ze-gluing zendabuko kunye nokuphucula ukusebenza kakuhle13.

5. Isiphelo

I-FLC's UV laser diode kunye nepicosecond UV lasers sele igubungele izicelo ezifanayo eziphezulu. Ukuba ufuna iiparitha ezicacileyo zemodeli ethile, kuyacetyiswa ukuba uqhagamshelane neqela lethu lokuthengisa ngokuthe ngqo