เครื่องป้อนฉลาก SMT ของฟูจิ PN:O20S-B

The main function of Fuji SMT label feeder is to take the label paper out of the material tray and place it accurately on the PCB board‌. Its working principle is to drive the slider to move through the motor, clamp or absorb the label paper at a certain speed, and then place it on the PCB board according to the preset position‌.

Types and scope of application of label feeder

There are many types of Fuji SMT label feeders. According to the width of the feeder, common specifications include 50mm, 85mm and 100mm. In addition, the label feeder is suitable for label paper of different materials, such as paper, plastic, copper, etc., and can peel more than 2 labels at the same time, which improves production efficiency‌.

Use and maintenance method

When using Fuji SMT label feeder, you need to follow the following steps:

‌Material strip installation‌: Install the label paper material strip on the feeder.

‌Material strip transmission‌: Through the transmission mechanism of the feeder, the label paper is gradually transmitted to the work head pick-up position.

‌Component pickup‌: The work head of the SMT machine picks up the label paper from the feeder and mounts it on the PCB board‌.

In order to ensure the normal operation of the feeder, regular maintenance is required, including:

‌ Regular cleaning ‌: Remove dust and dander generated during the operation of the feeder to prevent dust accumulation from affecting the accuracy.

‌ Regular refueling ‌: Lubricate key parts to prevent increased friction from causing decreased accuracy and increased noise.

‌ Regularly replace the air source filter ‌: Ensure that the air source is clean to prevent moisture and impurities from affecting the adsorption effect of the nozzle.

‌ Regular inspection of parts ‌: Check and replace damaged or loose parts to ensure the normal operation of the feeder ‌.

Through the above introduction, you can better understand the function, use and maintenance measures of Fuji SMT label feeder.