Precautions for SMT semi-automatic board loading

The main function of the pick and place machine is to mount electronic components on the pads of the pcb circuit board. Today, many chip processing factories have realized automated smt production lines, but there are still a small number of small chip factories that have semi-automated smt production lines. In the production line, it is necessary to manually put the printed pcb board into the conveyor belt of the connecting table and flow into the placement machine for placement. Then what problems should be paid attention to on the placement of the placement machine? .

The placement machine is located behind the solder paste printing machine and the spi inspection machine. Some factories may not even have a spi, and directly use a semi-automatic printing machine, and then manually put the board into the conveyor belt and flow into the placement machine.

Matters needing attention on the board of Smt placement machine

1. When uploading SMT board, the circuit board should be parallel to the track of the conveyor belt, and gently push it forward;

2. Make sure that the PCB is placed on the belt of the conveyor belt. Do not put it crookedly, it will cause the circuit board to get stuck;

We have a complete SMT equipment supply chain of major brands in the market, and an inventory of thousands of spare parts. We have been committed to meeting the needs of customers and partners. Providing the best solution, helps customers reduce costs and improve efficiency.