Lumentum solid-state fiber laser repair

Lumentum high efficiency skin micro-machining device PicoBlade meeting the following common failures and troubleshooting methods:

habitual failure

Optical path failure

Luminous flux skew: Possibly caused by optical elements, mounting position imbalance, mechanical structure movement, external force drop, etc. The guiding force is the direction of the light flux, the deviation of the direction, and the processing accuracy of the influence.

Decrease in luminous flux quality: optical element surface ash, oil residue, scratches or deformation, the effect of intense light on the surface is different, the output luminous flux is scattered, the intensity is uneven, etc. problems, the effect processing quality.

power failure

Electric power output failure determination: power source internal power source damage, high wave voltage aging or power cut-off line failure, possible guiding power output power or current wave movement, power source operation failure determination, influence light output efficiency consistency.

Power supply failure: Possible causes such as power supply failure, power supply failure, power supply failure, etc. Induced the light device to obtain normal work power without law, and to operate without law.

Cooling system failure

Cooling service quality leakage: Cooling pipes, heads, heat diffusers, etc. may cause leakage due to aging, improper use or improper installation. The cooling effect decreases due to the cooling effect, and the heat is too strong.

Ineffective cooling: failure of the cooling system, blockage of the heat diffuser, insufficient flow rate or high temperature due to the cooling aid, the possibility of using a light device without achieving effective cooling, the influence of its performance is very constant, the possibility of guiding the light device causes the heat to change.

Control system failure

Control failure: Possible occurrence of failure, interface failure, number setting, etc. problems. Guiding operators are not allowed to operate normally, and the lighting equipment is controlled and set up, and the efficiency of the operation is effective.

Hard control power line malfunction: control line core piece, electric appliance, sensor, etc., original output failure, transmitter light device without normal connection control signal, illegal arrangement of reference number operation.

The method of milling

optical path length

Regular school associate light path: Regular school optical original safety position, guarantee its associate confirmation. As shown in the figure, the optical flux is oblique, the demand and weight are changed to the new optical path, the position of the optical element is adjusted and the sum of the angles is adjusted, the mechanical structure of the same time is fixed, the fixed pin movement part, and the cancellation vibration source.

Clean optical elements: Use clean tools for testing, regularly clean optical elements, remove surface ash, oil stains, etc. As for optical original matter, there are some traces or changes, and the time is changed.

electricity supply

Power source parts: periodic power source internal components, whether or not to check whether or not to use the power source, use table, etc. In the current situation, the aging of the wave of electricity, and the ongoing renewal, will ensure the stability of the electricity source output.

Replacement and failure parts: As the source of the electric power source is opened, the maintenance time is broken, the replacement is caused by the replacement parts. If the young power supply model malfunctions, the construction process will be repaired or replaced by the technical personnel.

Cooling system structure

Preventing leakage: Regular equipment such as cooling pipes, ceilings, heat diffusers, etc., and time-saving problems. If you change the leakage, you can use the seal and fix it; you can use it as a guide, or you can replace it with new parts, and timely charge the cooling service.

Maintenance cooling effect: The operating conditions of the cooling system, if there is any failure and time repair or replacement. Periodic cleaning and heating of the ash on the heating device ensure good heating effect. At the same time, the flow rate and temperature of the cooling system can be adjusted to suit the desired storage capacity, and the cooling system can be changed when necessary.

restraint system structure

软品绊护：Regularly updated version of the book, guaranteed to ensure completeness and functional integrity. If there is a problem with the order, it is possible to try a new one, there are some problems, and there is a solution for the customer support staff.

Hard-wired power supply system: User-operated power supply system, waveguide, radio analysis, etc., control system, system and replacement failure source. In the future, the electric power failure occurred, and the electric power engineering process of the electric power plant continued to be repaired.