siemens siplace hs50 smt mashiinka meelaynta

Siemens SMT HS50 waa mashiin SMT ah oo heersare ah oo laga keenay Jarmalka, kaas oo si weyn loogu isticmaalo warshadaha wax soo saarka elektaroonigga ah kuna habboon meelaynta otomaatiga ah ee qaybaha kala duwan ee elektiroonigga ah. Naqshadeedu waxay isku daraysaa meelaynta xawliga sare leh, saxnaanta sare iyo dabacsanaanta sare, waxayna si gaar ah ugu habboon tahay baahida wax soo saarka waxtarka leh.

Xuduudaha farsamada

Heerka meelaynta: 50,000 qaybood/saacaddii

Saxnaanta meelaynta: ± 0.075mm (at 4 sigma)

Kala duwanaanshaha qaybaha: laga bilaabo 0.6x0.3mm² (0201) ilaa 18.7x18.7mm²

Cabbirka PCB: hal waddo 50x50mm² ilaa 368x216mm², labajibbaaran 50x50mm² ilaa 368x216mm²

Awoodda quudiyaha: 144 raadad, 8mm cajalad

Isticmaalka tamarta: 4KW

Isticmaalka hawada: 950 litir/daqiiqo (wakhtiga 6.5 bar ilaa 10 bar)

Cabbirka mashiinka: 2.4mx 2.9mx 1.8m (L x W x H)

Astaamaha

Saxnaanta sare iyo dabacsanaanta sare: Saxnaanta meelaynta waxay gaartaa ± 0.075mm, oo ku habboon wax soo saarka oo leh shuruudo sax ah oo sarreeya.

Meelaynta Xawaaraha Sare: Heerka meelayntu waa ilaa 50,000 qaybood/saacaddii, oo ku habboon wax-soo-saarka baaxadda leh.

Kala duwanaansho: Ku habboon meelaynta qaybaha kala duwan ee elektiroonigga ah, oo ay ku jiraan Resistor, Capacitor, BGA, QFP, CSP, PLCC, Connector, iwm.

Dayactirka: Qalabka si fiican ayaa loo dayactiray, oo leh nolol dheer oo adeeg ah, saxnaanta sare iyo xasilloonida wanaagsan.

Xaaladaha codsiga

Mashiinka meelaynta Siemens HS50 wuxuu ku habboon yahay meelaynta otomaatiga ah ee qaybaha kala duwan ee elektiroonigga ah, gaar ahaan shirkadaha wax soo saarka elektaroonigga ah ee u baahan hufnaan sare iyo shuruudo sax ah. Meelaynta xawaaraha sare iyo sifooyinka saxda ah ee saxda ah ayaa ka dhigaya inay si fiican u qabato khadadka wax soo saarka SMT