en
id
sk
tr
srp
swe
it
pt
nor
ben
may
bel
nl
fra
th
vie
ru
jp
kor
de
Sony SMT cable plays a vital role in the use of Sony SMT machines. They ensure the normal operation and efficient production of SMT machines. The following is a detailed introduction to Sony SMT cable:
Types and uses of cable
Sony SMT cable has many types, including but not limited to the following:
CCU cable: used to connect the control unit (CCU) of the SMT machine to ensure the normal operation and operation of the machine.
Nozzle cable: connects the nozzle and the SMT machine for picking up and placing components.
Substrate camera cable: connects the substrate camera for identifying and locating the component position.
Encoder cable: connects the encoder for detecting the movement state and position of the machine.
Specifications and parameters of cable
The specifications and parameters of the cable of Sony SMT machine vary depending on the model. For example, the SMT cable of SI-E1100 model includes the following specifications:
1-823-175-12: CCU cable.
1-838-355-11: Y axis of G200MK5/MK7.
1-829-493-12: X axis of F130WK.
1-791-663-17: X axis of E1100.
These cables ensure that the various components of the placement machine can communicate and work in coordination, thereby improving production efficiency and placement accuracy.
Installation and maintenance methods of connecting cables
When installing and maintaining Sony placement machine connecting cables, pay attention to the following points:
Pre-installation inspection: Make sure that the model and specifications of the connecting cables match the placement machine to avoid failures caused by mismatch.
Correct connection: Connect each component correctly according to the instructions to ensure that the connection is firm and the contact is good.
Regular inspection: Regularly check the wear and aging of the connecting cables, and replace damaged connecting cables in time to ensure the normal operation of the machine.
