sony pick and place machine nozzle rod PN:4-719-892-04

The Sony SMT nozzle bar is an important part that connects the SMT head and the nozzle, and is mainly used for accurate positioning and installation of electronic components. The nozzle bar is responsible for accurately positioning the nozzle above the electronic component during the SMT process, adsorbing the component on the nozzle through negative pressure, and then accurately placing it on the PCB board. This series of actions requires the nozzle bar to have extremely high precision and stability to ensure the accuracy and efficiency of the SMT. Types and functions According to the different models and SMT requirements of the SMT machine, the nozzle bar can be divided into fixed and adjustable types: Fixed nozzle bar: usually used for specific models of SMT machines, the length and angle are fixed and cannot be adjusted. Adjustable nozzle bar: more flexible, can be adjusted according to different SMT requirements to adapt to electronic components of different sizes and shapes. Installation precautions When installing the nozzle bar, pay attention to the following points: Accuracy requirements: Since the accuracy of the nozzle bar directly affects the accuracy of the SMT, special attention should be paid to maintaining its accuracy during the installation process to avoid deviations. ‌Stability‌: The nozzle bar needs to have good stability to ensure that there is no shaking or deviation during the patch process. Choose a suitable fixing method and make sure that all fasteners are firm and reliable.

‌Compatibility‌: It is necessary to consider its compatibility with the patch machine. Different models of patch machines may require different types of nozzle bars‌.

Impact on patch efficiency The performance of the nozzle bar directly affects the patch efficiency. If the nozzle bar is not accurate enough or has poor stability, it may cause deviations or errors in the patch process, thereby reducing the patch efficiency. In addition, if the type and size of the nozzle bar do not match the electronic components, it may also affect the patch effect or even damage the electronic components‌