If the IC head Z-axis motor is not installed properly, the consequences will be serious.

It’s a short circuit, you know what that is, right? You've probably encountered it with pick-and-place machines. But here’s a detail you might not know. Are you familiar with the IC head (TH)? How about the Z-axis motor? But you probably aren't familiar with the insulation layer on the motor coil, right?

When installing the IC head, you need to pay attention to the gap between the motor coil and the Z-axis bearing, as well as the magnets on both sides. If you're not careful, over time, the insulation layer on the Z-axis motor coil could get worn down, causing a short circuit. The Z-axis motor should be installed on the IC head first, and then the gap should be adjusted.

When adjusting the gap, make sure to observe carefully and handle it gently. These small details are something 99% of engineers don’t know. So, which one are you—one of the 99%, or the 1%?

Geekvalueでビジネスを向上させる準備はできていますか。

Geekvalueの専門知識と経験を活用して、ブランドを新しいレベルに引き上げます。

セールススペシャリストへの問い合わせ

デルの販売チームに連絡して、お客様のビジネスニーズに最適なカスタムソリューションを模索し、お客様が直面する可能性のある問題を解決します。

販売要求

私たちに注目

デルと連絡を取り合い、最新の革新、独自の特典、見解を発見し、ビジネスを新しいレベルに引き上げます。

見積依頼